DIY Ladder Bathroom Shelf With Suction (MJY008C)

Diy ladder shelf

Diy ladder shelf can be used in bathroom or kitchen room ,
with suction cups fix on nonporous surface like glazed ceramic,tile,glass ;
Also offer glue fixings for rough surface like lime, paint,wooden wall .

•Rubber suction cup : dia 73mm , black color
•ABS plastic
•Stainless steel wire : electropolish finish

What’s in the box
•suction cup : 2 pieces
•plastic and metal shelf : 2 pieces
•plastic plate : 1 piece
•10 g silicone glue 1 piece , glue base 2 pieces

Packing info

Packing (1set/polybag/box, 12pcs/ctn) Load quantity
Inner Box Size: 12.5 x 9 x 49 cm 20’GP: 4080 pcs
Outer Carton Size: 54.5 x 37.5 x 39.5 cm 40’GP: 8316 pcs
N.W.: 10.4 kg/ctn G.W.: 13.8 kg/ctn 40’HQ: 9648 pcs

Suction installation: tiles,glass,plastic,metal coating or other smooth surface .Cautions:
1.Reuse notice:put suction into 45 degree warm water 5 min, dry it off , then repeat above steps.
2.Put your matter after 2 hours test to sure it is firm installation.
3.Not recommended for valuable and friable matter (such as clock,glasses)

Installation by silicone glue : Application for tough surface-mosaic , wooden ,lime,latex paint, wallpaper,etc.

Cautions:
1.Reuse notice:put suction into 45 degree warm water 5 min, dry it off , then repeat above steps.
2.Put your matter after 2 hours test to sure it is firm installation.
3.Not recommended for valuable and friable matter (such as clock,glasses)